Chapter
[DISPLAY OPTION] menu
On the menu screen, select [DISPLAY OPTION] from the main menu, and select an item from the
Refer to “Navigating through the menu” (x page 57) for the operation of the menu screen. ff After selecting the item, press asqw to set.
[COLOR ADJUSTMENT]
Correct the color difference between projectors when using multiple projectors simultaneously.
1)Press as to select [COLOR ADJUSTMENT].
2)Press qw to switch the item.
ff The items will switch each time you press the button.
[OFF] | Color adjustment is not carried out. |
[3COLORS] | Adjusts the three colors [RED], [GREEN], or [BLUE]. |
[7COLORS] | Adjusts the seven colors [RED], [GREEN], [BLUE], [CYAN], [MAGENTA], [YELLOW], or [WHITE]. |
3)Select [3COLORS] or [7COLORS], and press the <ENTER> button.
ff The [3COLORS] or [7COLORS] screen is displayed.
4)Press as to select [RED], [GREEN], or [BLUE] ([RED], [GREEN], [BLUE], [CYAN], [MAGENTA], [YELLOW], or [WHITE] for [7COLORS]).
5)Press the <ENTER> button.
ff The [3COLORS:RED], [3COLORS:GREEN], or [3COLORS:BLUE] screen is displayed.
For [7COLORS], the [7COLORS:RED], [7COLORS:GREEN], [7COLORS:BLUE], [7COLORS:CYAN], [7COLORS:MAGENTA], [7COLORS:YELLOW], or [7COLORS:WHITE] screen is displayed.
ff Set [AUTO TESTPATTERN] to [ON] to display a test pattern of selected colors.
6)Press as to select [RED], [GREEN], or [BLUE].
7)Press qw to adjust.
ff The adjustment value changes between 0*1 and 2 048. *1 The lower limit varies depending on the adjusting color.
Note
ff Operation when correcting the adjustment color
When the correction color same as the adjustment color is changed: The luminance of the adjustment color changes.
When correction color red is changed: Red is added to or subtracted from the adjustment color.
When correction color green is changed: Green is added to or subtracted from the adjustment color.
When correction color blue is changed: Blue is added to or subtracted from the adjustment color.
ff This adjustment should be carried out by a person who is familiar with the projector or by a service person because a high level of skill is required to make a successful adjustment.
ff Set the [AUTO TESTPATTERN] to [ON] to automatically display a test pattern for use in adjusting the selected adjustment colors. ff Pressing the <DEFAULT> button on the remote control will restore the factory default settings for all items.
ff If [COLOR ADJUSTMENT] is set to other than [OFF], [COLOR CORRECTION] is fixed to [OFF], and [COLOR TEMPERATURE] is fixed to [USER]. (However, [WHITE BALANCE HIGH] cannot be adjusted.)
[COLOR CORRECTION]
Colors can be adjusted and registered for each input signal format.
1)Press as to select [COLOR CORRECTION].
2)Press qw to switch the item.
ff The items will switch each time you press the button.
ENGLISH - 75