Chapter
2)Press the <ENTER> button.
ff The
3)Press as to select [OSD POSITION].
4)Press qw to switch the item.
ff The items will switch each time you press the button.
[2]Sets to the center left of the screen.
[3]Sets to the bottom left of the screen.
[4]Sets to the top center of the screen.
[5]Sets to the center of the screen.
[6]Sets to the bottom center of the screen.
[7]Sets to the upper right of the screen.
[8]Sets to the center right of the screen.
[9]Sets to the bottom right of the screen.
[1]Sets to the upper left of the screen.
Setting [OSD DESIGN]Set the color of the menu screen (OSD).
1)Press as to select
2)Press the <ENTER> button.
ff The
3)Press as to select [OSD DESIGN].
4)Press qw to switch the item.
ff The items will switch each time you press the button.
[1]Sets to yellow.
[2]Sets to blue.
[3]Sets to white.
[4]Sets to green.
[5]Sets to peach.
[6]Sets to brown.
Setting [OSD MEMORY]Set hold for the position of the menu screen (OSD) cursor.
1)Press as to select
2)Press the <ENTER> button.
ff The
3)Press as to select [OSD MEMORY].
4)Press qw to switch the item.
ff The items will switch each time you press the button.
[ON] | Holds the cursor position. |
[OFF] | Does not hold the cursor position. |
Note
ff Even if [OSD MEMORY] is set to [ON], the cursor position will not be held when the <MAIN POWER> switch of the projector body is turned <OFF>.
Setting [INPUT GUIDE]Set whether to display the input guide (input terminal name, signal name, and memory number currently selected) in the position set in the [OSD POSITION].
1)Press as to select
80 - ENGLISH