Started Getting
Setting up
Lens shift and positioning
If the projector is not positioned right in front of the center of the screen, you can adjust the projected image position by moving the lens shift dials within the shift range of the lens.
■■Adjusting the lens shift
1111Remove the lens shift cover.
zzSee “About your projector” (page 19) regarding how to open the lens shift cover.
2222Rotate the lens shift lever in the direction shown in the figure (counterclockwise) to release the lock.
3333Adjust projection using the lens shift lever.
●● Horizontal shift
Adjust the projection by moving the lens shift lever horizontally according to the installation position of the screen and projector.
Up to approximately | Up to approximately |
| ||||||||||
26% of the |
| 26% of the | Screen | |||||||||
projection screen |
| projection screen | ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Move the lens shift | Move the lens shift |
 | lever in direction A | lever in direction B |
●● Vertical shift
Adjust by moving the lens shift lever vertically according to the installation position of the screen and projector.
Up to approximately 100% of the
Move the lens shift lever in direction D
projectionScreen screen
| Up to |
| approximately |
| 100% of the |
| projection |
| screen |
| Move the lens shift |
 | lever in direction C |
Attention
zzDo not force the lens shift lever. If excessive force is placed on the lever, it may break.
4444Rotate the lens shift lever clockwise to fix.
5555Attach the lens shift cover.
24 - ENGLISH