Settings

[LENS CONTROL] menu

[H-AREA POSITION]

You can move the frame area horizontally, such as aligning the right or left frame edge to the screen edge.

Moving left

Moving right

For example, when projecting an overscanned 16:9 projection area at a 4:3 aspect ratio on a 4:3 aspect screen, you can adjust the horizontal discrepancy between the screen position and the video display position.

16:9 projection area

4:3 screen

 

 

 

 

 

 

4:3 video display position

[V-AREA POSITION]

You can move the frame area vertically, such as aligning the top or bottom frame edge to the screen edge.

Moving Moving upward downward

For example, when projecting an overscanned 16:9 projection area at a 2.35:1 cinema scope screen movie on a 2.35:1 size cinema scope screen, you can adjust the vertical discrepancy between the screen position and the video display position.

2.35:1 cinema scope screen

16:9 projection area size video display position

2.35:1 cinema scope screen

[LEFT MASKING AREA]

You can place a blank (mask) area in the left side edge on the screen.

LessMore

zzSetting range: 0 to 70

[RIGHT MASKING AREA]

You can place a blank (mask) area in the right side edge on the screen.

LessMore

zzSetting range: 0 to 70

[UPPER MASKING AREA]

You can place a blank (mask) area in the upper side edge on the screen.

LessMore

zzSetting range: 0 to 70

[LOWER MASKING AREA]

You can place a blank (mask) area in the lower side edge on the screen.

LessMore

zzSetting range: 0 to 70

Note

zzIf it is set to [0], each masking function will be invalid. zzThe [MASKING AREA] function will be invalid when adjusting the [COLOR MANAGEMENT] or [SPLIT

ADJUST] settings, when displaying the [TEST PATTERN] or [WAVEFORM MONITOR], or when no signal is detected.

72 - ENGLISH