Panasonic PV-D4733S

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com

•Make settings according to amplifier

connected to optical audio output as shown

in above table.

*1 When connecting an amplifier (with an

optical digital input connector) which does

not contain the Dolby Digital or DTS

decoder, be sure to select “PCM”.

If “Bitstream” is selected, starting DVD play

may cause such a high level of noise as to

be harmful to your ears and damage the

speakers.

*2 When a DTS decoder is connected, please

select “Bitstream” in “dts”.

Audio Output

Select the digital output to be output from the optical

digital audio output connector of DECK.

■■

■ “LPCM (DVD)” selections

OFF: Linear PCM of less than 48 kHz/16 bit is

output. When playing DVDs recorded in linear

PCM of over 48 kHz/20 bit, no digital audio is

output. (Factory preset)

PCM: When playing DVDs recorded in linear PCM of

48 kHz/20 bit/24 bit or more, digital audio

converted to 44.1 kHz/16 bit or 48 kHz/16 bit is

output.

(Digital output of PCM audio is restricted to

48 kHz/16 bit or below for copyright protection.)

■■

■ “Dolby Digital” selections

Bitstream: Dolby Digital bitstream (1ch-5.1ch) is

output. (Factory preset)

PCM: When you have connected a amplifier that

doesn’t have a built-in Dolby Digital decoder.

■■

■ “dts” selections

Bitstream: DTS bitstream is output. (Factory preset)

PCM: When you have connected a amplifier that

doesn’t have a built-in DTS decoder.

■■

■

“DRC (Dynamic Range Compression)”

selections

OFF: Normal audio range is selected. (Factory preset)

ON: For dynamic sound even at low volume, this

is useful for late-night listening. [Dolby Digital

DVDs only].

Press

to select an item,

and

press

SET

repeatedly for

output. (See below.)

Press

to select

“AUDIO OUTPUT,”

and

press

SET

to display screen.

Settings for DVD Operation (continued)

Recommended setting

LPCM

(DVD)

PCM

Dolby

Digital

PCM*

Bitstream

DTS

PCM*

PCM

Bitstream

No amplifier is connected

AV amplifier (with digital

audio input connector)

without Dolby Digital/DTS

decoder

AV amplifier including

Dolby Digital decoder

AV amplifier including

Dolby Digital/DTS decoder

Type of amplifier

to be connected

Press

ACTION

to redisplay DVD MAIN

MENU and go to step 2 to setup another

item.

Or, press

ACTION

twice to exit.

Press

ACTION

to display DVD MAIN MENU.

Ready Checklist

DECK is in DVD mode, press DVD.

DVD MAIN MENU

SELECT :

SET : SET

END : ACTION

DISC LANGUAGES

AUDIO OUTPUT

STIL L MODE : AUTO

TV MODE : 4:3 Letterbox

PARENTAL

LOCK

LEVEL 8

AUDIO OUTPUT

SELECT :

SET : SET

END : ACTION

LPCM(DVD) : OFF

Dolby Digital : Bitstream

dts : Bitstream

DRC : OFF

D4733S P36-60 (030226 B-lot).p65 2003/02/26, 18:2048