12
Quick Guide
1Charge the Battery. (l 18)
≥Connect the AC Cable to the AC Adaptor and plug it into the
AC Wall Outlet.
≥Attach the Battery to the AC Adaptor. (This will start the
charging process.)
≥The [POWER] Lamp and [CHARGE] Lamp light up, and
charging starts. When the [CHARGE] Lamp goes off, charging
is completed.
≥Since the Battery will not be charged when the DC Cable is
connected to the AC Adaptor, disconnect it.
2Attach the Charged Battery to the Palmcorder. (l 18)
3Insert the Cassette. (l 20)
≥Slide the [OPEN/EJECT] 1 Lever toward the front and pull
down to open the Cassette Compartment.
≥Insert the Cassette.
≥Press the [PUSH] mark 2 to load the Cassette.
≥Close the outside compartment Cover.
4Start recording. (l 28)
≥Turn the Palmcorder on. (l 20)
≥Rotate the Switch 3 to [ON]. (The [CAMERA] Lamp lights up.)
≥Press the 4 Button. (Recording starts.)
≥Press the 4 Button again to pause the recording.
To View the Playback Picture
5Switch to the VCR Mode, rewind the tape, and play
the tape back. (l 43)
≥Set the 5 Switch to VCR mode. (The [VCR] Lamp lights up.)
≥Press the 6 Button. (Rewind the tape.)
≥Press the 7 Button. (Playback starts.)
≥Press the 8 Button. (Playback stops.)
6Turn the Palmcorder off. (l 20)
≥Set the 9 Switch to [OFF].
O
F
F
O
N
M
O
D
E
1
2
3
4
5, 6
1
CAMERA
VCR
CARD PB
3
4
7
8
6
SEARCH
BACK
LIGHT
FADE
2
CAMERA
VCR
CARD PB
5
9
OPEN /
EJECT
O
F
F
O
N
M
O
D
E
PUSH
PV-GS70P.book 12 ページ ２００３年３月１４日 金曜日 午前９時２０分