39
ߣ
32
3
44
STILL
1
MENU
PUSH
WB/SHUTTER
IRIS/MF/VOL/JOG
FLASH
2
1
PHOTO
SHOT
Using the Built-in Flash
The Built-in Flash enables you to record still pictures in a dark place.
The Flash lights twice to detect the surrounding luminosity and to
light properly.
1Set [CAMERA FUNCTIONS] >> [RECORDING SETUP]
>> [FLASH] >> [ON] or [AUTO].
≥If [AUTO] is selected, the Flash can be lit if light is needed by
sensing the surrounding luminosity.
2Slide the [FLASH] Lever to open the Flash.
≥The Flash 1 pops up.
3Press the [STILL] Button.
≥Flash is lighted and the image becomes still.
4Press the [PHOTOSHOT] Button or Recording Start/
Stop Button.
≥Flash is not lighted when recording.
Adjusting Brightness of the Flash
Set [CAMERA FUNCTIONS] >> [REC ORDING SETUP] >>
[FLASH LEVEL] >> a desired Flash Level.
≥For recording under normal conditions, set it to [NORMAL]. (The
[ß] Indication 2 appears.)
≥If the brightness is not enough in [NORMAL] setting, set it to [i]
(the [ßi] Indication appears), if it is too much, set it to [j] (the
[ßj] Indication appears).
To reduce the “Red Eye” Effect
Set [CAMERA FUNCTIONS] >> [REC ORDING SETUP] >>
[RED EYE REDUCTION] >> [ON].
≥The [£] Indication 3 appears.
≥Even if the [RED EYE REDUCTION] is set to [ON], you still may
get “red eyes phenomenon” depending on the recording condition.
≥For other notes, see page 88.
PV-GS70P.book 39 ページ ２００３年３月１４日 金曜日 午前９時２０分