20 RQT9777
To prevent the speakers from falling, it is recommended, as an additional
protection measure, to attach the speakers to the wall or table with a fall
prevention cord (hereafter “cord”).
≥Consultation with a qualified installation specialist concerning the appropriate procedure when attaching to a concrete wall or a
surface that may not have strong enough support is recommended (>12, 15). Improper attachment may result in damage to
the wall and speakers, and personal injury.
≥Use a cord that is capable of supporting over 10 kg (22.05 lbs) (with a diameter of about 1.5 mm (1/16q)).
≥The speaker fall prevention measure is to minimize the possibility of damage and harm, but it does not completely guarantee
this effect.
≥Keep the screws out of reach of children to prevent swallowing.
≥Make sure that the slack of the cord is minimal.
Additional speaker fall prevention measures
When attaching the speakers to a wall
ACord§BScrew eye CWall DWall-mounted
speakers
§ If the cord cannot be threaded through the holes, try bending the cord in 2 locations,
about 10 mm (13/32q) apart from the tip, at an angle of 45o (as illustrated above).
Horizontal placement
Vertical placement
SC-HTB370PPC_RQT9777-1P_mst.book Page 20 Tuesday, January 29, 2013 11:48 AM