Getting started
RQT9778 13
Connect the speaker cables.
§ If you have difficulty inserting the cable, try straightening the speaker cable and then bending the
cable about 20 mm (25/32q) from the tip, at an angle of approx. 45o (as illustrated above).
Drive a screw into the wall.
≥Use the measurements indicated below to identify the screwing positions on the wall.
≥Leave at least 20 mm (25/32q) of space above and on each side of the speaker to allow enough space for fitting the speaker.
≥Keep the screws out of reach of children to prevent swallowing.
1Insert the wire fully.
r: White
s: Blue line
≥Insert the wire fully, taking care not to insert
beyond the wire insulation.
2Press into the groove.
ARight speaker connector
BCenter speaker connector
CLeft speaker connector
AAt least 30 mm (1 3/16q)
B‰4.0 mm (5/32q)
C‰7.0 mm to ‰9.4 mm (9/32q to 3/8q)
DWall or pillar
E5.5 mm to 6.5 mm (7/32q to 1/4q)
F238 mm (9 3/8q)G745 mm (29 11/32q)H248 mm (9 3/4q)I20 mm (25/32q)
JWall mounting hole
45
Push
Red
White
Green
Front view (semi-transparent image)
SC-HTB770PPC_RQT9778-1P_mst.book Page 13 Tuesday, January 29, 2013 11:33 AM