17

Printer setting

Using this Printer, you can print an image stored on the personal
computer. Here described is a method to set the Printer Driver from the
Start Menu. Image processing software may also be used for a similar
setting. (Some software types may not provide the setting procedure.)
Set the Printer Driver before printing. (Image processing software is not
supplied. Please purchase one separately.)
1From the [Start] menu, Select [settings] >> [Printers (and
Fax)].
2Right-Click the [Panasonic SV-P10] icon and select
[Properties].
Printer drivers dialog box appears.
The Properties screen may be shown differently depending on the
environment.
3Click on the [Paper] tab, then Select [Portrait] or
[Landscape] to set the Print direction.
4Click on the [Device Options] tab, then click the [«] mark
in the setting box [Image control] to select [1frame] or
[4frames].
If [4frames] is selected, the paper is split into four frames, each of
which will have the same image.
5Click the [OK] Button.
The setting is completed.
If you print an image from the image processing software, proceed to
printing from the menu after the setting is completed. When [Panasonic
SV-P10-USB00X] 1 is displayed, insert a sheet of paper.
To abort printing, click the [Abort] Button. During printing, the print
action stops after the completion of current image printing.
Please read [Readme] before starting to use.
Setting up from the [Graphics] tab will not affect any actual prints.
Whatever the setting is made on the Printer, the setting on the personal
computer takes priority.
Some software may not provide correct printing. (For details, read the
manual for the software.)
1
2
3
4,5
1