Watching TV
Antenna / Cable service without a box
Initial setting
1.Connect coax
Connect a COAX wire from either an antenna or Basic Cable service to the TV's "ANTENNA/CABLE IN" screw terminal.
TV (ANTENNA/CABLE IN)
Antenna
2.Scan the channel
MENU | Menu > Setup > ANTENNA/Cable setup > |
ANTENNA/Cable signal, Auto program
1.Select either Cable or Antenna programming source in ANTENNA/Cable signal.
2.Select Auto program and then the appropriate scan mode: (All channels / Analog only / Digital only).
3.Start scanning.
If no channels are found by the end of the scan, then check the following:
Antenna's position - or availability of Cable service.
Cable, Satellite or Fiber services with a box are typically connected to the TV's A/V inputs, preferably HDMI, for best HD picture. In such a case, the channel scanning is not needed.
15 | (0100301) |