12
S-VIDEOS-VIDEO
L
R
YY
L
R
L
R
VIDEOVIDEO
AUDIOAUDIO
P
B
P
B
P
R
P
R
12
12
AUDIO OUT
HPJ
COMPONENT VIDEO
INPUT
L
R
L
R
VIDEOVIDEO
AUDIOAUDIO
INPUT
How to connect the HDMI Terminal
HDMI∗1 (HDMI : High Definition Multimedia Interface) is the first all digital consumer electronics A/V interface
that supports uncompressed standard. One jack supports both video and audio information.
This HDMI∗1 input can be connected to an EIA/CEA-861/861B∗2 compliant consumer electronic device,
such as a Set Top Box or DVD player equipped with HDMI or DVI output connection.
By inputting a High-bandwidth Digital Content Protection (HDCP) high-definition picture source to the HDMI
terminal of this television, high-definition pictures can be displayed on the screen in their digital form.
∗1. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks
of HDMI Licensing LLC.
∗2. EIA/CEA-861/861B profiles compliance covers profiles for transmission of uncompressed digital video
including high bandwidth digital content protection.
∗3. HDMI-DVI conversion cable part no. (TY-SCH03DH):available on Panasonic Website (USA only)
(www.panasonic.com)
∗4. AUDIO-IN, Please refer to page 24. (HDMI-IN)
If the external device has DVI output only, use a HDMI-DVI
conversion cable∗
3
to connect to the HDMI jack on the LCD.
Also, connect the Audio out signal from the external device.
(Set Top Box or DVD player) to the AUDIO IN∗
4
jacks beside
the HDMI input.
This model support following format.
Please adjust the format of connecting equipment.
1080i
480P
480i
No. of dots (H × ×
× ×
× V)
1,920 × ×
× ×
× 1,080i
720 × ×
× ×
× 480P
640 × ×
× ×
× 480P
720(1,440) × ×
× ×
× 480i
Vertical scanning frequency(Hz)
59.94/60
59.94/60
59.94/60
59.94/60
Applicable VIDEO Signal
This input terminal is not intended for use with computers.
AUDIO signal (L.PCM)
When the digital sound signal is included at connecting HDMI equipment, L.PCM sound is available.
Sampling frequency
48KHz / 44.1KHz / 32 KHz
Notes:
(1) This HDMI connector is Type A.
(2) If you cannot display the picture because your Digital Set Top Box does not have a Digital OUT terminal
Output setting, use the component Video input (or the S video Input or Video Input). In this case the picture
will be displayed as an analog signal.
HDMI Cable (not included)
HDMI or DVI
signal out
Set Top Box
DVD player
Audio Cable
(not included)