9
Quick Start
Guide Accessories/Optional Accessory
Accessories
A Screws (2)
XSN3+4FJ
M3 × 4
B Wood screw (4)
THM2AB001
C Bit (for pedestal) (1)
• Place the TV set in a position where it will not protrude from the table when swiveled.
•
Make sure there is enough space between the TV set and wall, so that when the TV set is swiveled it does not hit the wall.
Location
Place the TV at a comfortable distance for viewing. Avoid placing it where sunlight or other bright light (including reflections)
will fall on the screen. Use of some types of fluorescent lighting can reduce remote control transmitter range. Adequate
ventilation is essential to prevent an internal component failure. Keep away from areas of excessive heat or moisture.
Adjust the stand to your desired angle.
The stand angle can be rotate 30°/60°/90° to the right/left. (see Control rotation angle)
ab
[Rotation angle: 30°]
TH-32LRU30 a: 9.8 ” (248 mm)
b: 7.6 ” (193 mm)
TH-37LRU30 a: 11.0 ” (279 mm)
b: 8.8 ” (222 mm)
TH-42LRU30 a: 12.5 ” (316 mm)
b: 9.8 ” (248 mm)
ab
[Rotation angle: 60°]
TH-32LRU30 a: 15.0 ” (381 mm)
b: 12.8 ” (323 mm)
TH-37LRU30 a: 17.1 ” (433 mm)
b: 14.7 ” (373 mm)
TH-42LRU30 a: 19.0 ” (483 mm)
b: 16.5 ” (418 mm)
ab
[Rotation angle: 90°]
TH-32LRU30 a: 17.3 ” (439 mm)
b: 14.2 ” (360 mm)
TH-37LRU30 a: 19.7 ” (500 mm)
b: 16.4 ” (416 mm)
TH-42LRU30 a: 21.9 ” (555 mm)
b: 18.4 ” (467 mm)
Control rotation angle
The rotation angle can be controlled at 30° or 60°.
It is not necessary to attach the screws for the 90° angle rotation.
Temporarily remove the 5 screws shown below.
Attach A screws (2) to each angle control position.
Swivel plate
[Bottom view]
12
5
4
3
[Front of swivel plate] [Back of swivel plate]
[For 30°]
[For 60°]
Set-up
6.5” (165 mm)
6.1” (155 mm)
5.7” (144 mm)
a
b
0.079” – 0.091”
(2 – 2.3 mm)
Use the specialized bit
(supplied) in position
a
,
and screw in
B
wood
screw (2).
[Back of fixed plate]
Align the swivel hole in the bottom of the
swivel plate with
B
wood screw that was
screwed in previously, and place the TV
set onto the swivel plate.
Slide the TV set forwards until it stops,
then fix it in place.
b
Lastly, use the C specialized bit to fix
B Wood screw in place.
[View from above]