35
Select SIGNAL from the “SET UP” menu during RGB input signal.
Press to select each item.
SIGNAL [ RGB ]
SYNC H
-
FREQ. kHz
V
-
FREQ. Hz
H & V
31.5
60.0
SYNC
SYNC H & V
SYNC CS
SYNC ON G
Setting RGB sync signal
Confirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT
signal).
H & V:
The H and V sync signals are input from the HD/VD connector.
ON G: Uses a synchronized signal on the Video G signal, which is input
from the G connector.
CS: Uses a synchronized signal of Composite Sync input.
Displays the H (Horizontal)/V (Vertical) frequencies.
This display is valid only for RGB/PC and DVI input signal.
Display range:
Horizontal 15 - 110 kHz
Vertical 48 - 120 Hz
H-FREQ. (kHz)/V-FREQ. (Hz)
H
-
FREQ. kHz
V
-
FREQ. Hz
31.5
60.0
SET UP for Input Signals
Press to exit from adjust mode.
R
Press (ACTION) button
SET UP 1/2
SIGNAL
SCREENSAVER
INPUT LABEL
COMPONENT/RGB-IN SELECT RGB
RGB1
OSD LANGUAGE ENGLISH (US)
POWER SAVE OFF
STANDBY SAVE ON
POWER MANAGEMENT OFF
Note:
Sync cannot be adjusted while a DVI signal is being applied.