Installing Drivers and Software
28
The USB, printer, TWAIN driver and Interactive
Panaboard Software are installed in your computer
by following procedures.
Note
•Do not yet connect a USB cable to the
electronic board.
1Power on your computer and start Windows*1.
•Log on as an administrator for Windows 2000
or Windows XP.
*1Microsoft Windows operating system
(hereafter Windows)
2Insert the CD-ROM into the CD-ROM drive.
The Setup window appears automatically.
•Depending on the operating system or the
settings that you are using, the Setup
window may not appear automatically.
In such a case, execute “Menu.exe” in the
CD-ROM from the Explorer.
3When “Welcome” window appears, click
[Next].
4Click [Interactive Panaboard Setup].
•To install the Panasonic-DMS software, click
[Panasonic-DMS] (see page 30).
•To read the operating instructions in the
provided CD-ROM, the Adobe Reader or
Acrobat Reader must be installed in your
computer. It can be downloaded from the
Adobe's Web site if Internet is available.
5Click [Install Software].
6Read ”End-User License Agreement” carefully
and click [Yes].
7When the following window appears, check
that the electronic board is not connected to
your computer and click [OK].
•If the USB cable is connected to the
electronic board, remove it and click [OK].
•For Windows 98 or Windows Me, a floppy
disk or CD-ROM for installing the operating
system may be required.
•If the screen prompts to restart Windows,
restart Windows.
Installing Drivers / Interactive
Panaboard Software