Basic Transmission Settings
Halftone
The Halftone setting is useful when sending photographs or illustrations with gray tones. Your machine is preset to HALFTONE = Off. You can select either Fast mode or Quality mode.
Press HALFTONE to:
| FAST |
|
|
| FAST |
|
|
| FAST | |||
| QUALITY |
|
|
| QUALITY |
|
|
| QUALITY | |||
|
|
| ||||||||||
| HALFTONE |
| HALFTONE |
| HALFTONE | |||||||
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
HALFTONE = Off |
| HALFTONE = Quality |
| HALFTONE = Fast | ||||||||
Note: When you select HALFTONE, FAST or QUALITY, your machine will automatically select Fine Resolution.
Verification Stamp
The Verification Stamp helps you to confirm successful transmissions by stamping the bottom of each successfully transmitted page with a small mark.
Press STAMP to:
STAMPSTAMP
STAMP = Off | STAMP = On |
Note: 1. When you store a document in memory, the Verification Stamp will stamp on the document if it is successfully stored in memory. In this case the Verification Stamp is not a confirmation that the document was successfully transmitted. If you wish to disable the use of the Verification Stamp when storing document in memory, change the setting of Fax Parameter No. 28, see page 36.
2.To change the preset Verification Stamp position, change the setting of Fax Parameter No. 04, see page 35.
42