Sending Documents 
Direct Transmission
If your machine's memory is full or you wish to send the document real time, use Direct Transmission.
Manual Number Dialling (Direct Transmission)
To dial the telephone number manually, follow the steps below.
1
Set document(s) face down.
2 MEMORY
Make sure that the lamp goes off.
3 Enter a telephone number from the keypad.
Ex: | 5 | 5 | 5 | 1 | 2 | 3 | 4 |
4
START
Your machine starts to dial the telephone number.
4
ENTER STATION(S)
THEN PRESS START 00%
ENTER STATION
00%
PRESS START TO DIAL 5551234
* DIALLING * 5551234
Note: 1. If you need a special access number to get an outside line, dial it first then press PAUSE to enter a pause (represented by a º±º) before dialling the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling, press
TONE (represented by a º/º).
The dialling mode will be changed from Pulse to Tone after dialling the digit º/º.
Ex: 9 PAUSE TONE 5551234
3. To stop the transmission, press STOP . The display shows:
COMMUNICATION STOP ? 1:YES 2:NO
Press 1 to stop the transmission. The Communication Journal will not print out regardless of the printout mode setting of the Communication Journal.
51