INSERT/ASSEMBLE MANUAL EDIT SET UP menu

Key

Key designation

 

Description

F1

TIMING°

Sets the timing with which to record the fields at the edit IN point

 

For setting the edit timing.

and OUT point. This menu item can be set by pressing the F1

 

 

key and the F key together.

 

 

F1:

Editing starts from the odd-numbered field at the IN

 

 

 

point, and it ends when an even-numbered field one

 

 

 

frame before the OUT point is recorded.

 

 

F2:

Editing starts from the even-numbered field at the IN

 

 

 

point, and it ends when an odd-numbered field at the

 

 

 

OUT point is recorded.

 

 

F1/F2: The fields for the edit IN point and OUT point are determined

 

 

 

by the timing at which the edit command is issued.

 

 

 

If the edit timing command is issued in an even-

 

 

 

numbered field, editing is ended in an odd-numbered

 

 

 

field; conversely, if the edit timing command is issued in

 

 

 

an odd-numbered field, editing is ended in an even-

 

 

 

numbered field.

 

 

≥The edit timing can also be set on the AUTO EDIT SET UP menu.

 

 

If a different mode has been set on the AUTO EDIT SET UP

 

 

menu, the mode which has been set on the INSERT/ASSEMBLE

 

 

MANUAL EDIT SET UP menu will be changed.

 

 

≥The F1 setting is forcibly established when the CONTROL

 

 

(REMOTE/LOCAL) switch has been set to LOCAL.

F2–F7

——

 

 

 

 

 

F8

EXIT

Returns the VTR to the MANUAL EDIT menu screen.

 

 

 

F9

ERR.STP

When the ENV value at which editing started (5 frames before)

 

Error stop.

has dropped to 25% below the REC ENV value when optimizing

 

 

was completed, an error is considered to have occurred, and one

 

 

of the following operations is selected.

 

 

ON: During execution of editing in optimize mode, if an error

 

 

 

has occurred up to the IN point, editing is aborted and the

 

 

 

stop mode is assumed.

 

 

OFF: Displays a message and continues editing when an error

 

 

 

has occurred.

F10

TRACKING

Under normal times, tracking adjustment is not necessary.

 

For adjusting the tracking.

Adjustment is made if tracking disparities have occurred during editing.

 

 

VAR:

The tracking can be adjusted manually.

 

 

 

Refer to “Manually adjusting the tracking” (on page 106).

 

 

FIX:

The tracking is fixed.

 

 

OPT. ONCE: At the initial editing after the cassette has been

 

 

 

inserted, the tracking is optimized while the tape is

 

 

 

playing back up to the IN point. The tracking is not

 

 

 

subsequently optimized.

 

 

 

When the PLAY button and STAND BY button are

 

 

 

pressed together during EDIT/PLAY, the tracking

 

 

 

is optimized again, and it is optimized with each

 

 

 

EDIT/PLAY operation.

OPT. AUTO: The tracking is optimized while the tape is playing back up to the IN point with each editing operation, and it is retained even if the VTR is transferred to another menu.

Refer to “Automatically adjusting the tracking.”

°This item cannot be displayed when the 1080/23p, 1080/24p, 1080/25p or 720/59p format has been selected. (It is forcibly set to F1.)

– 101 –