INSERT/ASSEMBLE AUTO EDIT menu

Key

Key designation

Description

F1

LAST X

 

For calling the edit data to

 

be input.

When the F1 key is pressed, “LOAD” is displayed, and the edit data which was input last is called.

F2

LAST ED

 

For calling all the last data

 

edited.

When the F2 key is pressed, “LOAD” is displayed, and all the data which was edited last is called.

F3

W/PLYR

Performs remote control of VTR connected by RS-422A.

 

Continuous VTR remote

ON:

Remote control possible.

 

control ON/OFF.

OFF:

Unit operated independently.

 

 

≥See also F5 (PLYR SEL) key.

F4

VAR MEMO

This function stores the playback speed and direction settings

 

Variable memory.

established by the search dial in its memory and automatically

 

 

reproduces these settings. (At times, these settings are

 

 

reproduced by one’s own VTR; at other times, they may control

 

 

the player that is connected.)

 

 

ON: Enables the variable memory function.

 

 

OFF: Disables the variable memory function.

 

 

 

F5

PLYR SEL

PLYR-1:Controls the VTR connected to REMOTE OUT

 

Selects player for remote

 

 

connector.

 

control.

PLYR-2:Controls the VTR connected to REMOTE IN/OUT

 

 

 

 

connector.

 

 

 

 

F6

R/P SEL

PLAYER:

Performs remote control of the player selected by

 

Selects VTR for operation.

 

 

F5 (PLYR SEL) key.

 

 

RECORDER: Control is the main unit (recorder) only.

F7

TRIM

ON: Registered edit points are corrected by frame unit.

 

Frame correction of edit

OFF:

Releases trim function.

 

point.

 

 

 

 

 

 

F8

SET UP

Transfers the VTR to the AUTO EDIT SET UP menu screen.

 

 

 

F9

INSERT

ON: Sets the editing mode ON.

 

For setting the editing

OFF: Sets the editing mode OFF.

 

mode ON/OFF.

 

 

 

F10

SPLIT

This function registers each audio and video edit point during

 

Split editing ON/OFF.

insert editing.

 

 

ON:

Enables split editing.

 

 

OFF: Releases split editing.

 

 

(For details, refer to pages 41 and 42 in the Hardware Operating

 

 

Instructions.)

 

 

 

 

 

F11

——

 

 

 

 

 

 

F12

MANUAL EDIT

Transfers the VTR to the MANUAL EDIT menu screen.

F13

CH SELECT

Transfers the VTR to the INSERT AUTO EDIT CH SELECT

 

Edit channel selection.

(editing channel selection) menu screen (but only for insert

 

 

editing).

 

 

 

 

 

 

– 109 –