AUDIO IN SET UP menu
F11 (RATE CON) key
∑Operation
≥The menu item is set to ON or OFF for both the recording and playback systems simultane- ously: it is not possible to select the item’s setting for recording or playback only.
≥Similarly, the menu item is set to ON or OFF for all channels CH1 to CH8 (or CH1 to CH4) simultaneously: it is not possible to select the item’s setting for specific channels only.
≥If the DATA mode has been selected using F10 (STYLE) when the system format is 1080/59i 4ch or 720/59p 4ch, the DATA mode setting takes precedence. (Recording and playback are conducted with the rate converter bypassed.)
∑Formats supported
≥The menu item is displayed and ON or OFF can be selected as its setting only with the system
formats listed below. |
|
|
≥1080/23p (psf)_8ch, | 1080/25p (psf)_8ch, | 1080/50i_8ch, 1080/59i_8ch, |
≥720/59p_8ch, | 1080/59i_4ch, | 720/59p_4ch |
≥When 1080/24p(psf) 8ch has been selected as the system format, the menu display is cleared, and the rate converter is forcibly set to ON.
≥When 525/59i 4ch, 525/59i 8ch or 625/50i has been selected as the system format, the menu display is cleared, and the rate converter is forcibly set to OFF.
∑Precautions when selecting OFF as the rate converter setting
≥The video input and AES input must be synchronized.
≥The video output and reference signal selected by OUT REF must be synchronized.
≥During P.PLAY playback, the frequency of the digital audio output ceases to be 48 kHz, and it is no longer possible for the signals to be received by external components.
≥Similarly, during frame rate conversion playback (such as when a tape recorded at a system frequency of 23 Hz is to be played back at a system frequency of 25 Hz), it is no longer possible for the signals to be received by external components.
– 57 –