AUDIO OUT SET UP menu

∑Adjusting the audio output signals in relation to the video signals

(1)Press the F1 (A/V PHASE) key to put the display in reverse video.

A/V PHASE

UNITY

(2)Adjust the phase difference using the ADJUST control.

When the ADJUST control is turned, the display changes to VAR.

(The adjustment can now be varied in 1-sample increments from i16 to j96 samples.)

ADJUST

i4

SAMPLES

 

 

 

A/V PHASE

VAR

(3) Upon completion of the adjustment, press the F1 (A/V PHASE) key.

≥When the UNITY/VAR key is pressed during the adjustment, the UNITY mode is restored. ≥When the key is pressed again, the mode reverts to VAR.

UNITY

/VAR

∑Fade function

During editing, the cut-edited data is recorded automatically; during playback, this data is detected and the section concerned is V-faded.

Playback V-fade function OFF

Audio signal (A)

Audio signal (B)

 

 

:

Noise appears at the joins in the editing.

Playback V-fade function ON

Audio signal (A)

Audio signal (B)

 

 

:

V-fading is performed for an instant to eliminate the noise.

– 69 –