TC/CHR menu
Key | Key designation |
| Description |
F6 | CF BIT°1 | ON: CF BIT is recoorded. | |
| For selecting the color | OFF: CF BIT is not recorded. | |
| frame bit ON/OFF during | ≥When [EXT LTC], [S VITC] or [S LTC] is selected in the F1 key, | |
| recording. | the VTR conforms to the external color frame bit. | |
F7 |
|
| |
|
|
| |
F8 | SETUP | Transfers the VTR to the TC/CHR SET UP menu screen. | |
|
|
| |
F9 | CONVERT°2 | Transfers the VTR to the TC/CHR CONVERT menu screen. | |
F10 | TCR | LTC: LTC is read out all the time. | |
| For selecting time code | AUTO: At low speed, VITC is read preferentially. When it is not | |
| read out mode. |
| read, then LTC is read. |
|
| VITC: VITC is read out all the time. | |
|
| ≥In either setting, when the time code cannot be read, values | |
|
| corrected by control signal are read out. (Interpolation mode is | |
|
| assumed and [INTRP] is displayed on the HOME menu.) | |
|
|
|
|
F11 | SUPER | TC.ST: | The time code and VTR operating mode are |
| For setting superimpose. |
| superimposed. |
|
| TC.ST.RT: The time code, VTR operating mode and remaining | |
|
|
| tape time are superimposed. |
|
| TC.UB: | The time code and user’s bit are superimposed. |
|
| TC.TC: | The time code is displayed in two steps. |
|
|
| Both the original time code information and the time |
|
|
| code information in the format to which it has been |
|
|
| converted can be displayed at the same time. (Refer |
|
|
| to the note on the next page.) |
|
| TC: | Only the time code is superimposed. |
|
| OFF: | Nothing is superimposed. |
|
|
| |
F12 | EX SUPER | ERR/FMT: When there are warnings, warning displays appear. | |
|
|
| When there are no warnings, the system format and |
|
|
| tape format frequencies are displayed. |
|
| ERR: | The warning displays or format information are |
|
|
| superimposed onto the screen. |
|
| OFF: | The warning displays or format information are not |
|
|
| superimposed. |
F13 | CHR TYPE | REVERSE: Characters appear against a black background. |
| For selecting type of | INTENSE: Characters are displayed more intensely. |
| character to be |
|
| superimosed. |
|
|
|
|
°1This is displayed only when the 480/59.94i or 576/50i system format has been selected.
°2This is displayed only when the 1080/23psf, 1080/23p, 1080/24psf, 1080/24p, 1080/25psf, 1080/25p or 1080/50i system format has been selected.
– 76 –