TC/CHR SET UP menu

Key

Key designation

Description

 

F1–F6

 

 

 

 

 

 

 

F7

TCG OUT

For selecting whether to latch the TCG display and LTC output

 

 

using the INPUT CHECK key°.

 

 

 

MOMNT: Establishes the INPUT CHECK mode only while the

 

 

key is held down.

 

 

 

LATCH: The INPUT CHECK mode is established when the

 

 

INPUT CHECK key is pressed, and it is held even

 

 

when the key is released. The mode is released in a

 

 

mode other than the EJECT, STBY ON/OFF or STOP

 

 

mode or when the F1 (OUTPUT) key on the HOME

 

 

menu is pressed.

 

F8

EXIT

Returns the VTR to the TC/CHR menu screen.

 

 

 

 

 

F9

VITC.L

For transferring to the VITC LINE selection menu.

 

 

SD mode: The recording VITC superimposing

 

 

 

and the lines in which it is

 

 

 

NTSC: 10 – 20 lines

 

 

superimposed are set. The

 

 

(Default 14, 15)

 

 

playback VITC superimposing and

PAL: 8 – 22 lines

 

 

the lines in which it is

(Default 11, 13)

 

 

superimposed are set.

 

 

 

HD mode: The DOWN CON SD output VITC superimposing

 

 

and the lines in which it is superimposed are set.

 

 

 

 

F10

VITC

For selecting whether the VITC information is to be

 

For superimposing VITC

superimposed on SD recording and output.

 

 

onto the SD output.

ON: VITC is superimposed.

 

 

 

OFF: VITC is not superimposed.

 

F11

——

 

 

 

 

 

 

F12

VITC

For selecting whether the VITC information is to be carried on

 

For selecting the VITC.

the HD SDI output.

 

 

 

Selects whether the VITC is to be carried.

 

 

 

ON: VITC is carried.

 

 

 

OFF: VITC is not carried.

 

 

 

 

 

F13

LTC

For selecting whether the LTC information is to be carried on the

 

For selecting the LTC.

HD SDI output.

 

 

 

Selects whether the LTC is to be carried.

 

 

 

ON: LTC is carried.

 

 

 

OFF: LTC is not carried.

 

°The video input signals can be checked at the SD SDI MONITOR OUT or HD SDI MONITOR OUT connector, and the audio input signals can be checked at the MONITOR connector and HEADPHONES jack; these signals are switched to the input signals while the INPUT CHECK key is held down.

– 82 –