TC/CHR CONVERT menu

This menu is displayed by pressing the following keys: TC/CHR ) F9

∑2-level and 3-level time code displays

≥Front panel

≥When the 24➝ 30 mode has been selected by the F1 (MODE) key on the TC/CHR CONVERT menu, a 2-level display appears with the original time code displayed on the top level and the converted time code displayed on the bottom level.

≥When the 25➝ 30 mode has been selected, a 3-level display appears with the converted value displayed on the middle and bottom levels.

F13

F12

F11

F10

RC_30SYS

OFF

F9

F1

F2

F3

F4

F5

F6

F7

F8

F13

F12

F11

F10

F9

RC_30SYS

OFF

F1

F2

F3

F4

F5

F6

F7

F8

<Note>

When 24➝ 30 is selected by the F1 (MODE) key and a 24 format tape is used, TCR 25TC will appear as “¢¢:¢¢:¢¢:¢¢”.

TC_SYNC point setting

When the center cursor key is pressed, the 24TC display is highlighted. To enter the time code, use the number keys and cursor keys (2, 1) to set the time code, and then press the ENT key. Move on to the

30TC/25TC value setting using the cursor keys (3, 4), and proceed in the same way to set and enter the time code.

Key

Key designation

Description

F1

MODE

For selecting the time code format conversion mode.

 

 

24>30: The original 24-frame count display and 30-frame count

 

 

display mode is established.

 

 

(Window: 24TC/30TC display)

 

 

25>30: The original 25-frame count display and 24-and

 

 

30-frame count display mode is established.

 

 

(Window: 24TC/25TC/30TC display)

 

 

 

F2

——

 

 

 

 

– 85 –