TC/CHR CONVERT menu

Key

Key designation

 

 

Description

F3

SYNC PHASE°

For setting the reference for the 3:2 conversion sequence.

 

 

A: Frame A is used as the reference to convert the time code.

 

 

B: Frame B is used as the reference to convert the time code.

 

 

C: Frame C is used as the reference to convert the time code.

 

 

D: Frame D is used as the reference to convert the time code.

 

 

 

 

 

F4

——

 

 

 

F5

DF MD

For selecting whether the 3:2 pull-down output from the 1080/23psf

 

 

(p) or 1080/24psf (p) format after it is converted into the time code

 

 

and output is to be in the drop frame or non-drop frame mode.

 

 

DF:

 

The output will be in the drop frame mode.

 

 

NDF: The output will be in the non-drop frame mode.

 

 

 

F6

RC_30SYS

F6 (RC_30SYS) key appears when the 23.98 Hz has been

 

 

selected as the VTR system frequency.

 

 

Sets the 30 system edit mode with system format 24.

 

 

ON:

30 system editing

 

 

OFF: 24 system editing

 

 

 

F7

24 TAPE LTC_OUT

F7 (24 TAPE LTC_OUT) key appears when the 25/50 Hz has

 

 

been selected as the VTR system frequency.

 

 

Sets the LTC OUT output (during 24 tape playback with

 

 

25 system).

 

 

ON: LTC output according to tape format (24 tape TC)

 

 

OFF: 25 TC output

F8

EXIT

Returns the VTR to the TC/CHR menu screen.

 

 

 

F9

SUPR_FRQ

For selecting whether to add the frequency information on the

 

 

time code superimposed display.

 

 

ON: The frequency information is added. Example: 24LTCR

 

 

OFF: The frequency information is not added. Example: LTCR

 

 

 

F10

RC_TC°

For selecting the time code which is to be output to the remote

 

 

connectors (RS-422, etc.).

 

 

24TC: The original time code with the frame count of 24 is output.

 

 

30TC: The post-conversion time code with the frame count of 30

 

 

 

 

is output.

F11

SD SUPER

For selecting the time code which is to be output to the SD

 

 

monitor connector.

 

 

24TC:

The original time code with the frame count of 24 is

 

 

 

 

output.

 

 

30TC:

The post-conversion time code with the frame count of

 

 

 

 

30 is output.

 

 

(25TC): The post-conversion time code with the frame count of

 

 

 

 

25 is output.

 

 

 

 

 

– 86 –