Paradyne 3510 Canada Notice to Users of the Canadian Telephone Network

No repairs may be performed by the user. Should you experience difficulty with this

equipment, refer to

inside the cover

of this document.

For Digital Data Service (DDS) installations, inform the local telephone company of the

appropriate facility interface code for the service you desire.

DDS Facility

Interface Code Data Rate (bps)

04DU5-24 2400

04DU5-48 4800

04DU5-96 9600

04DU5-19 19,200

04DU5-56 56,000

04DU5-64 64,000

The DDS Service Order Number is 6.0Y. The jack configurations required are RJ48S for

the Model 3510 DSU and RJ48T for the Model 3511. With an RJ48T configuration, you

must specify the number of data lines you require (1 through 8).

After the telephone company has installed the requested service and jack, you can

connect the DSU with the cable provided. An FCC-compliant telephone cord and

modular plug are provided with this equipment. This equipment is designed to be

connected to the telephone network or premises wiring using a compatible modular jack

that is Part 68 compliant.

Canada – Notice to Users of the Canadian Telephone Network

The Canadian Department of Communications has certified that this equipment meets

certain telecommunications network protective, operational, and safety requirements.

The Department does not guarantee that the equipment will operate to the user’s

satisfaction.

Before installation, verify connectivity of this equipment to the local telecommunications

company’s facilities. The equipment must be connected by an acceptable method. In

some cases, the telecommunications company’s inside wiring associated with

single-line individual service may be extended with a certified connector assembly

(telephone connection cord). The customer should be aware that compliance with the

above conditions may not prevent degradation of service in some situations.

If you experience difficulty with this equipment and require service, refer to

in the front of this document.

Repairs to certified equipment should be made by an authorized Canadian

maintenance facility. Any repairs or alterations made by the user to this equipment, or

equipment malfunctions, may cause the telecommunications company to ask you to

disconnect the equipment.