Paradyne 6800 manual Netview/PC, Connecting Locally

Connecting the Components

Netview/PC

Alerts can be exported to the NetView PC. If this option is chosen, your system cannot be configured with an alert log printer. The diagram in Figure 4-21 illustrates the connection.

You can connect a NetView/PC either locally or remotely. The following sections explain.

Connecting Locally

To connect to a local NetView/PC, you will need the following materials:

•035-0153-0031 cable

•002-0052-0031 connector

To establish the connection, perform the following steps:

1.Connect the grounded end of the 035-0153-0031 cable to an available port on the IPC-1600 card in the host processor.

2.Connect the other end of the 035-0153-0031 cable to the 002-0052-0031 connector.

3.Connect the 002-0052-0031 connector to the serial port on the NetView/PC.

Figure 4-21. Netview/PC Connection

6800-A2-GN22-30 January 1997 4-43