Parker Hannifin OEM6250

OEM6250 Installation Guide

Mounting the OEM6250

NOTE: The drawing below illustrates the dimensions of the OEM6250 printed circuit board. The

board is shipped from the factory attached to sheet metal which allows either flat mounting or side

mounting of the OEM6250. This board will fit in a 6U rack (if you remove the PCB from the sheet metal).

Max.

Component

Height

1.48

(37.59)

9.19

(233.43)

11.00

(279.40)

0.70

(17.78) 1.00

(25.40) 8.00

(203.20)

10.10

(256.54)

10.01

(254.25)

9.67

(245.62)

Inches (Millimeters)

Provision for #10

Mounting Screws

(6 Plcs.)

1.00

(25.40)

0.50

(12.70)

6 5 4 3 2 1

ANI Option Board

If you ordered the “OEM6250-ANI”

product, this option board is factory

installed. If you ordered the board

separately (p/n “OPT-OEM6250-A”),

install it now. Allow 0.91 (23.11)

mimimum for component height

Environmental

Considerations Temperature. Operate the OEM6250 in ambient

temperatures between 32°F (0°C) and 122°F (50°C). Provide a

minimum of 2 inches (50.8 mm) of unrestricted air-flow space

around the OEM6250 (see illustration). Fan cooling may be

necessary if adequate air flow is not provided.

Humidity. Keep below 95%, non-condensing.

Airborne Contaminants, Liquids. Particulate

contaminants, especially electrically conductive material,

such as metal shavings and grinding dust, can damage the

OEM6250. Do not allow liquids or fluids to come in contact

with the OEM6250 or its cables.

2.0

(50.8)

2.0

(50.8)

2.0

(50.8)

2.0

(50.8)

mum

pace = 2