An approved external SELV power supply that incorporates a disconnect device must be used and positioned within reach of the operator’s position.
1.4 PATTON CONTACT INFORMATION
If you have any trouble operating the Model 1194, please contact Patton Electronics Technical Support at
The following information may be required when applying to your local telephone company for leased line facilities. The Universal Service Order Code (USOC) is
| Facility | Service | Network | |
Service | Interface | |||
Code | Connection | |||
| Code | |||
|
|
| ||
|
|
|
| |
1.544 Mbps SF format without line | 6.0N | RJ48C | ||
power |
|
|
| |
|
|
|
| |
1.544 Mbps SF and B8ZS without line | 6.0N | RJ48C | ||
power |
|
|
| |
|
|
|
| |
1.544 Mbps ANSI ESF without line | 6.0N | RJ48C | ||
power |
|
|
| |
|
|
|
| |
1.544 Mbps ANSI ESF and B8ZS | 6.0N | RJ48C | ||
without line power |
|
|
| |
|
|
|
|
1.5 FCC PART 68 COMPLIANCE STATEMENT (1194/T1)
This equipment complies with Part 68 of FCC Rules. Please note the following:
1.You are required to request service from the telephone company before you connect the CSU to a network. When you request ser- vice, you must provide the telephone company with the following data. When you request T1 Service, you must provide the telephone company with the Facility Interface Code. Provide the telephone company with both of the following codes:
6