SD5-PMetal Ceiling Panel

C1459M-B (2/03)

®

IMPORTANT SAFEGUARDS AND WARNINGS

Prior to installation and use of this product, the following WARNINGS should be observed.
1. Installation and servicing should be done only by qualified service personnel and
conform to all local codes.
2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P
enclosure, it is designed for indoor use only and it must not be installed where
exposed to rain and moisture.
3. The installation method and materials should be capable of supporting four times
the weight of the unit and equipment.
4. Only use replacement parts recommended by Pelco.

DESCRIPTION

The SD5-P metal ceiling panel is designed for use with Spectra Series in-ceiling back box and DF5 in-ceiling fixed-mount domes. The metal ceiling
panel can be used to replace or reinforce the 2' x 2' ceiling tile in suspended ceiling installations.
The following parts are supplied:
Qty.Description
12’ x 2’ metal panel
4T-rail clip
Pelco World Headquarters • 3500 Pelco Way • Clovis, California 93612 USA • www.pelco.com
USA & Canada • Tel: 800/289-9100 • Fax: 800/289-9150
International • Tel: 1-559/292-1981 • Fax: 1-559/348-1120