Pelco C2210M important safety instructions

ICS3COND-MKITMarine KitC2210M (12/04)

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Only use attachments/accessories speciﬁed by the manufacturer.

6. Installation should be done only by qualiﬁed personnel and conform to all local codes

7. This product is not suitable for splash zone installations. Only use stainless steel marine-rated

enclosures and pan and tilts for splash zone installations.

The ICS3COND-MKIT marine kit is designed to protect the ICS300 Camclosure

and the

ICS300-COND adapter from galvanic corrosion by electrically isolating the unit from the mounting

structure. When installed correctly the marine kit eliminates the conductive path between the

aluminum adapter and the dissimilar metal of the mounting structure.

The ICS3COND-MKIT includes the following parts:

Qty Description

1 Gasket

1 3/4-inch NPT liquid type ﬁtting

1 #7 drill bit

2 Nylon hex screws

2 6-32 x 1 1/4-inch, Monel, button head screws

4 10-24 x 3/8-inch, Monel, Phillips, ﬂat head screws

1 1/4-20 spiral point tap

IMPORTANT:

•

Galvanic corrosion is a process that is common in a marine environment. It requires

marine installation techniques to protect the installation. If you are unfamiliar with such

installation techniques, you should consult a marine installation expert.

•

Pelco cannot accept any responsibility for incorrect installations that result in galvanic

corrosion damage to the unit.

•

This product must be installed correctly to provide protection against galvanic corrosion.

Failure to follow these installation instructions will void the warranty.

C2210_ICS Marine Kit.fm Page 1 Friday, December 10, 2004 9:38 AM