Pelco c294m operation manual

SWM-PA SeriesPole Adapter for theSpectra® CompactWall MountInstallation/Operation ManualC294M (11/98)

1. Installation and servicing should only be done by qualified service personnel

and conform to all local codes.

2. Installation shall be done in accordance with all local and national electrical

and mechanical codes utilizing only approved materials.

Please thoroughly familiarize yourself with the information in this

manual prior to installation and operation.

The SWM-PA Series Pole Adapter is designed to adapt Pelco’s SWM Series Spec-

tra® Compact Wall Mount to a pole. It can be used for either indoor or outdoor

applications. The adapter is supplied with two stainless steel straps and two stain-

less steel screws. The adapter is attached to a pole with the two straps, and a

mounting cleat (supplied with the wall mount) is installed on the adapter with the

two stainless steel screws. Once the mounting cleat is firmly in position on the

adapter, the SWM wall mount is then attached and held in place by a set screw.

The adapter and mounting cleat both have a feedthrough opening for electrical

cables, not a conduit fitting.

The adapter is constructed of aluminum and has either a light gray or black polyes-

ter powder coat finish.

SWM-PA-GY Pole adapter for use with the SWM Series Spectra® Compact

Wall Mount. Gray finish.

SWM-PA-BK Same as SWM-GY, except black finish.

= Vertical bar in the right margin indicates change or addition.