8 C2612M (5/06)
3. Align the DIMM module with the socket so that the notch in the module lines up properly with the break in the DIMM socket. Refer to
Figure 8.
4. Make sure that the white retaining clips are not in the locked position by pressing outward and down on each clip. Refer to Figure 8.
Figure 8.
DIMM Module and DIMM Socket Alignment
5. Carefully, but firmly, push the DIMM module into the empty socket until it is properly seated. The module is properly seated when the
retaining clips snap back into place as in Figure 9.
NOTE:
When inserting the DIMM module into the socket, use enough pressure to ensure that the retaining clips snap back into place.
Be careful, however, not to use excessive force that might damage the DIMM module or surrounding components.
Figure 9.
Seating and Securing the DIMM Module
3
4
5
5