Pelco DX9100 WEEKLY RECORDING SCHEDULE

62 C634M-D (12/04)

WEEKLY RECORDING SCHEDULE

NOTE: To make sure there is no delay during scheduled recording, begin the recording at least five minutes before the actual

recording time. For example, schedule a recording at 7:55 a.m. instead of 8:00 a.m.

1. Select the “Weekly recording schedule” radio button.

2. Click Continuous or “Event record.”

3. In the time bars, click the desired start/end times for recording for each day of the week, or enter the exact start/end

times in the “Fine tune” fields.

4. Click Apply.

The example below shows a

weekly recording schedule from 7:05 a.m. to 12:05 p.m. The boxes in the time bars are

blue with a red border. You can make the boxes smaller or larger by dragging them with your mouse.

Figure 84. Continuous Weekly Recording Schedule Page

The example below shows a weekly

schedule from 7:05 a.m. to 12:05 p.m. The boxes in the time bars are yellow

with a red border. You can make the boxes smaller or larger by dragging them with your mouse.

Figure 85. Weekly Event Recording Schedule Page

To delete a time period:

1. Click “No record.”

2. Click the boxes in the time bars.