Pelco BK4024, BK4220, HK4024, HK4220 manual

C2415M (11/99)BK4000 Series Blower KitHK4000 Series Heater Kit

Prior to installation and use of this product, the following WARNINGS should be observed.

1. Installation and servicing should only be done by qualified service personnel and conform

to all local codes.

2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P

enclosure, it is designed for indoor use only and it must not be installed where exposed to

rain and moisture.

3. Only use replacement parts recommended by Pelco.

4. After replacement/repair of this unit’s electrical components, conduct a resistance

measurement between line and exposed parts to verify the exposed parts have not been

connected to line circuitry.

Please thoroughly familiarize yourself with the information in this manual prior to installation

and operation.

3500 Pelco Way

Clovis, CA 93612-5699

USA

In North America & Canada:

Tel (800) 289-9100

FAX (800) 289-9150

International Customers:

Tel +1 (559) 292-1981

FAX +1 (559) 348-1120

www.pelco.com

BK4000 Blower kit for EH4014/EH4018 Series Enclosure, 120 VAC, 4 watts

BK4024 Same as BK4000 except for 24 VAC, 3 watts

BK4220 Same as BK4000 except for 230 VAC, 4.8 watts

HK4024 Heater kit, thermostatically controlled, 24 VAC, 40 watts, for EH4014/EH4018

Series Enclosure, activates ON at 40°F (4.44°C) and OFF at 60°F (15.56°C)

HK4220 Same as HK4024 except for 230 VAC, 30 watts