8 C288M-G (8/05)
INSTALL DOME
1. Attach the dome back box to the mount and tighten the set screw.
2. Make all necessary electrical connections to dome. (Use the documentation provided with the dome.)
IMPORTANT:
If you are wiring more than one dome, wire the power in each dome the same way. For example, the wiring from one side
of the transformer must be connected to the corresponding connector on each dome. If you reverse the wiring, the cameras will be out of
phase with each other and may produce what appears to be vertical roll when switching between cameras.
3. Place extra fuses in the clips attached to the inside of the access plate.
4. Replace the access plate and tighten the screws enough to compress the gasket and create a waterproof seal.