Pelco Manual C616M-B (11/97) 15

7.0 SPECIFICATIONS
GENERAL
Environment: Indoor only
Operating Range: 32° to 120° F (0° to 49° C)
Weight: Unit Shipping
2 lbs (0.9 kg) 4 lbs (1.8 kg)
Construction
Chassis: Steel, galvanized
Cover: Steel, black polyester powder coat
Front Panel: Aluminum, black polyester powder coat
Rear Panel: Steel, black polyester powder coat
Dimensions: See Figure 5
MECHANICAL
Alert actions: Two-tone beeper, flashing LED (red), relay contacts, and logic
output (active ground)
Sensitivity: Adjustable
Auto On Timer: Dip switch with timer settings. See Table B, Setup Time Table.
Display
Adjustment: Window outline from white to gray (rear panel adjustment)
ELECTRICAL
Video Input: Passive looping: 525 lines, 60 Hz; 625 lines, 50 Hz
Power: 4.7 vA at 120 VAC, 50/60 Hz (dedicated isolated power supply.)
120 VAC wall transformer provided with unit (230 VAC with
MD2001-X)
Relay Contacts
Voltage: 40 VDC or RMS maximum
Current: 0.8 amps DC or RMS maximum (resistive load)
Logic Output: When activated, a ground level signal is at Pin 5. When inactive,
there is a +10 VDC level signal at Pin 5 (referenced to Pin 4,
ground). (Must be connected to high input impedance devices;
more than 50k ohms.)
Connectors: Two (2) video BNC connectors (Video In/Video Out)
One (1) 6-pin mating plug (supplied for the 6-pin connector)
One (1) 12 VAC power jack (wall transformer power input)