4Pelco Manual C2422M (5/00)

OPERATION

POWER-UP DISPLAY

When the Spectra Lite™ dome is powered up, the selected protocol, revision number, and
other information is displayed on the monitor. For example, the screen might show the
following information:
The information displayed depends on the selected
protocol (C, D, or P) and the menu selection for power-
up mode. (Refer to the
Power-Up Mode in the
Programming
section).
The information remains on the monitor until the dome
is moved.

HOW TO OPERATE YOUR SPECTRA LITE DOME

Operation How to Control
Pan and Tilt Move joystick left/right and up/down.
Scanning
Stop Scan Preset 96
Random Scan Preset 97
Frame Scan Preset 98
Auto Scan Preset 99
Zoom Far To zoom far, do the following:
1. Press the Zoom Tele button or turn the joystick clockwise until you have the picture you want or you
reach the zoom limit.
2. Release the button or joystick.
Zoom Wide Press the Zoom Wide button or turn the joystick counterclockwise.
Presets Refer to the documentation supplied with the controller.
Auto Flip Turn on or off in the programming menu. Refer to the
Programming Guide
in the
Programming
section.
For more information, refer to
Operating Notes
.
PELCO SPECTRA LITE
CONFIGURE DONE
Protocol C