Pelco tlr2168 - page 15

Pelco Manual C652M (7/99) 15

Figure 3. Front View

5.0 CONTROLS

5.1 FRONT PANEL

1.POWER button

Press for on; press again for off. The POWER indicator

illuminates when the VCR is turned on.

2.EJECT button

Press to remove the cassette.

3.Cassette loading slot

Insert the cassette in this slot to load it.

4.STOP button

Press to halt all tape-related functions.

5.REC (record) button

Press to begin recording.

6.JOG dial

Use to advance the tape frame-by-frame and to program

the menus.

7.SHUTTLE ring

Use to adjust the playback speed and to program the

menus. Turn this ring to the right to advance the tape or to

forward search. Turn it to the left to rewind a tape or to

reverse search. You can also use it to clear the alarm list,

power loss list, and timer recording. It also lets you pro-

gram or exit the menus after setup.

8.PLAY button

Press to play back a previously recorded tape.

9.PAUSE/SHUTTLE HOLD button

Press this button during recording to temporarily stop tape

movement. Press again to resume recording. When it is

pressed during playback, tape movement stops and a still

field is displayed. Press again to restore normal playback.

Pressing and holding this button after turning the SHUTTLE

ring allows continuous high-speed playback even if the

SHUTTLE ring is released.

10.COUNTER MEMORY/SKIP/INDEX button

Press this button to switch among counter memory (fluo-

rescent display shows M), skip search (displays SKIP),

and index search (displays INDEX).

• Counter Memory: Turn the SHUTTLE ring to the right

and the tape rewinds to the 00000 counter position

and stops (Section 10.1.1).

• Skip Search: The VCR fast forwards or rewinds until

it locates an index signal and then plays back for

about four seconds in 2H or 6H mode, doing this until

it reaches the end or beginning of the tape (Section

9.3.2 ).

• Index Search: During fast forward or rewind, the VCR

searches for alarm index signals. When it finds one,

the VCR plays back the tape and stays in still mode

(Section 9.3.1).

11. TIMER REC button

Press to make a timed recording.

12. REC/PLAY MODE buttons

• Set to 2H, L24H, 48H - 168H, or 0H mode to set the

recording speed in SP (standard play) mode. Set to

2H, L24H, 24H, 48H - 168H, or 0H mode to set the

playback speed in SP mode.

• Set to 6H, L18H, 48H - 168H, or 0H mode to set the

recording speed in EP (extended play) mode. Set to

6H, L18H, 48H - 168H, or 0H mode to set the play-

back speed in EP mode.

13. COUNTER RESET button

Press to reset the counter to 00000.

14. DISPLAY button

Press to display the Main menu. Press again to show

the time display.

15. POSITION/VERTICAL ADJUST buttons (+/-)

• Pressing the (+) button moves the day and time dis-

play to the right. Pressing the (-) button moves the

day and time display down the screen. The display

cannot be adjusted if a warning is displayed.

• Pressing either button minimizes vertical jitter in the

still mode or during fast playback. Refer to Section

9.4.3 for details.

16. TRACKING buttons (+/-)

Press these buttons if noise is present during playback,

reverse playback, or slow playback.

17. PICTURE control

Use this control to adjust picture quality between soft and

sharp.

18. VIDEO switch

Use the switch to select color or black and white re-

cording and playback.

REW FF

JOG/ADJUST

CLEAR/ ENTER/

SHUTTLE

REC

STOP

PLAY

POWER

EJECT

PICTURE

TRACKING

POSITION/

VERTICAL

ADJUST

REC/PLAY

MODE

COUNTER

RESET

COUNTER MEMORY/

SKIP/INDEX

PAUSE/

SHUTTLE HOLD

DISPLAY

TIMER REC

VIDEO

SOFT SHARP

COLORB/W

FLUORESCENT DISPLAY 14

1517