28 Pelco Manual C652M (7/99)
6.10.2 Set the Day and Time
1. Press the DISPLAY button to display the Main menu on the monitor.
2. Turn the JOG dial to select FIRST TIME SET UP.
3. Turn the SHUTTLE ring to the right. The First Time Set Up menu will appear.
4. Turn the JOG dial to select TIME DATE ADJUST.
5. Turn the SHUTTLE ring to the right. The Time Date Adjust menu will appear.
6. Do the following to advance the clock by one hour and set Daylight Savings to
ON:
Turn the SHUTTLE ring to the right. The DAYLIGHT SAVINGS display will
flash. Turn the JOG dial to select ON.
• The clock advances by one hour and the Daylight Savings Time symbol
( ) will be displayed next to the present time display.
• To cancel Daylight Savings Time, switch DAYLIGHT SAVINGS to OFF.
NOTE:
If power goes out while Daylight Savings Time is selected,
the power failure mark “X” will replace the Daylight Savings Time
symbol. When the power failure mark “X” disappears, the Daylight
Savings Time symbol ( ) will reappear.
<
MAIN MENU
>
DISPLAY
TIME DATE SEARCH
TIMER PROGRAM
RECORDING SET UP
REAR TERMINAL
MAINTENANCE
FIRST TIME SET UP
Use JOG to select,
and ENTER.
Press DISPLAY to exit.
<
MAIN MENU
>
DISPLAY
TIME DATE SEARCH
TIMER PROGRAM
RECORDING SET UP
REAR TERMINAL
MAINTENANCE
FIRST TIME SET UP
Use JOG to select,
and ENTER.
Press DISPLAY to exit.
<
FIRST TIME SET UP
>
TAPE END
QUASI V-SYNC
TAPE LENGTH
PB HEAD SELECT
BUZZER
TIME DATE ADJUST
STOP
ON
T-120
NORMAL
WRNG
<
FIRST TIME SET UP
>
TAPE END
QUASI V-SYNC
TAPE LENGTH
PB HEAD SELECT
BUZZER
TIME DATE ADJUST
STOP
ON
T-120
NORMAL
WRNG
OFF
01
01
97
00 :00 : 00
DAYLIGHT SAVINGS
MONTH
DATE
YEAR
TIME
<
TIME DATE ADJUST
>
OFF
01
01
97
00 :00 : 00
DAYLIGHT SAVINGS
MONTH
DATE
YEAR
TIME
<
TIME DATE ADJUST
>
OFF
01
01
97
00 :00 : 00
DAYLIGHT SAVINGS
MONTH
DATE
YEAR
TIME
<
TIME DATE ADJUST
>