Pelco tlr2168 - page 46

46 Pelco Manual C652M (7/99)

9.4.2 Picture Quality Adjustment

This control lets you adjust the playback picture so the outline is sharper or softer.

Figure 31. Picture Quality Adjustment

9.4.3 Vertical Adjustment

Do the following to reduce or eliminate picture vibration at the top and bottom.

1. If the vibration occurs in still, slow motion, fast playback (x2), or normal play-

back in 24H – 168H or 0H mode, play a tape recorded in 2H or 6H mode on

this VCR and press the PAUSE/SHUTTLE HOLD button.

If the vibration occurs during normal playback in L24H mode, play a tape in its

playback mode.

2. Press the POSITION/VERTICAL ADJUST buttons (+ or -) to reduce or elimi-

nate picture vibration.

Figure 32. Vertical Picture Adjustment

NOTE:

This control is effective

only during playback.

NOTES:

• Picture vibration in L18H play-

back mode is not adjustable with

the POSITION/VERTICAL AD-

JUST buttons.

• Horizontal vibration is not adjust-

able with the POSITION/VERTI-

CAL ADJUST buttons.

• To return vertical adjustment to

its initial setting, press the PO-

SITION/VERTICAL ADJUST

buttons (+ or -) at the same time

during still playback.

PICTURE

SOFT SHARP

WHEN THE PICTURE

IS VIBRATING

TRACKING POSITION/

VERTICAL

ADJUST TRACKING POSITION/

VERTICAL

ADJUST