Pelco Manual C649M (7/99) 21
6.3 MAIN MENU
•DISPLAY
Sets the display format of the time and date on the monitor.
•TIME DATE SEARCH
Sets the time/date and direction to search for a desired location on a tape.
•TIMER PROGRAM
Sets the timed recordings.
•RECORDING SET UP
Sets the alarm recording mode, alarm recording duration, emergency record-
ing, recording mode, and one-shot recording.
•REAR TERMINAL
Sets the number of frames or fields to record for CLK OUT, output signal of the
CALL OUT terminal, and the MODE OUT terminal, etc.
•MAINTENANCE
Displays the power loss list and alarm list, etc. Initializes all menu settings.
Clears the power loss list and alarm list.
•FIRST TIME SET UP
Sets the quasi v-sync, tape length, playback head selection, buzzer setting,
time/date, and VCR operation when the end of the tape is reached.
6.4 DISPLAY MENU
6.4.1 Display Mode
This is where you set the display mode. (Set the current date and time in the First
Time Set Up menu. Refer to Sections 6.10.1 and 6.10.2.) The default is DISPLAY
MODE 1.
DISPLAY MODE 1 Displays date and time.
DISPLAY MODE 2 Displays date, day of the week, present time, and recording
mode.
DISPLAY MODE 3 Displays nothing until an alarm recording starts–then date,
alarm recording number, etc. is displayed.
DISPLAY MODE 4 Displays nothing. Even in the case of alarm recording
nothing is displayed on the monitor.
During an alarm recording, the alarm recording number is displayed if the display
mode is set from 1 to 3.
6.4.2 Time Date Size
This is where you set the size of the letters in the day and time display. The default
is SMALL.
SMALL The letters become small.
LARGE The letters become large.
6.4.3 Background Color (Blue Back)
This is where you set a blue background on or off.
ON The blue screen overlays the recorded picture when the
menu is displayed on the monitor.
OFF There will be no blue screen. The menu display overlays the
recorded picture.
Figure 8. Main Menu
Figure 9. Display Menu
<
MAIN MENU
>
DISPLAY
TIME DATE SEARCH
TIMER PROGRAM
RECORDING SET UP
REAR TERMINAL
MAINTENANCE
FIRST TIME SET UP
Use JOG to select,
and ENTER.
Press DISPLAY to exit.
<
DISPLAY
>
1
SMALL
ON
11 – 11 – 98 09 : 21 : 01
DISPLAY MODE
TIME DATE SIZE
BLUE BACK
Ex.
<
MODE 1
>
NOTE:
This setting will also affect
the background color when there
is no recording input signal. When
set to ON, the warning “NO SIG-
NAL” appears on the blue screen.
When set to OFF, neither the blue
screen nor the warning appears on
the monitor.