5 When the white balance is set to J (Fluorescent Light), use the four- way controller (45) to select [W (white)], [D (daylight)] or
[N (neutral)].
6 Press the shutter release button halfway.
White Balance
W 
MENU Cancel | OK OK |
4 TakingPictures
The White Balance setting is saved and the screen returns to capture status. Refer to Step 6 of “How to Use the Menus” (p.43) for other operations after the setting has been made.
Saving the White Balance 1p.107
Auto Bracketing 1p.63
Manual Setting
Have a blank sheet of white paper ready.
1 | Select K(manual) on the White Balance screen. |
| ||
2 | Point the camera at the blank | White Balance |
| |
| sheet of paper so that it fills the |
|
|
|
3 | screen of the LCD monitor. |
|
|
|
Press the shutter release button |
| W |
| |
| fully. |
| SHUTTER Adjust |
|
|
|
|
| |
| The white balance is automatically | MENU Cancel | OK OK | |
|
|
|
| |
4 | adjusted. |
|
|
|
Press the 4 button. |
|
|
| |
The setting is saved and the screen returns to the [ARec. Mode] menu.
5 Press the 3 button.
The camera is ready to take pictures.
Any changes made to the White Balance setting are invalid in d mode.
96