4 TakingPictures
Saving the Settings (Memory)
You can choose whether you want the set values to be saved when the camera is turned off or returned to the defaults. The items that can be saved or reset are listed below. If you select O(On), the settings will be saved in the status they were in immediately before the camera was turned off. If you select P(Off), the settings will be reset to the defaults when the camera is turned off. The table below also shows whether the Memory default setting for each item is On or Off. Items not listed here will be saved in the selected settings when the camera is turned off.
Item | Description | Default | |
Setting | |||
|
| ||
Flash Mode | The flash mode set with the { button and | O | |
controller (4) (1p.78) | |||
|
| ||
Drive Mode | The drive mode set with the { button and | P | |
|
| ||
Focus Mode | The focus mode set with the {button and | P | |
controller (5) (1p.75) | |||
|
| ||
Zoom Position | The zoom position set with the zoom lever (1p.61) | P | |
MF Position | The manual focus position set with the {button and | P | |
|
| ||
White Balance | The [White Balance] setting on the [ARec. Mode] | P | |
menu (1p.82) | |||
|
| ||
AE Metering | The [AE Metering] setting on the [ARec. Mode] | P | |
menu (1p.86) | |||
|
| ||
Sensitivity | The [Sensitivity] setting on the [ARec. Mode] menu | P | |
| (1p.87) |
| |
EV Compensation | The EV compensation value set with the | P | |
controller (45) (1p.63) | |||
Digital Zoom | The [Digital Zoom] setting on the [ARec. Mode] | O | |
menu (1p.62) | |||
|
| ||
DISPLAY | The LCD monitor information display mode set with | P | |
the OK button (1p.73, p.105) | |||
|
| ||
| If a new SD Memory Card is inserted when On has |
| |
File # | been selected, file numbers are assigned | O | |
| sequentially. |
|
Setting [MF] to O(On) sets [Zoom Position] to O(On) at the same time.
92