2 |
|
| Instant Install | |
|
|
| If you are like us, the first thing you will want to do is to play your favourite | |
|
|
| ||
|
|
| piece of music through your new SM6. The following instructions are written to | |
|
|
| enable you to achieve this as quickly as possible. These are not comprehensive | |
|
|
| instructions, but are designed to enable you to play music now! | |
| Note: |
| ||
|
| Please take the time to read the SM6 manual thoroughly as it |
| |
|
|
| incorporates many features, which will enhance its operation. | |
|
|
|
|
|
|
|
| Placement | |
|
|
| The SM6 is a reference preamplifier and best results will be achieved when | |
|
|
| placed on a solid surface with adequate ventilation. DO NOT place on a | |
|
|
| carpeted floor or cover the preamplifier! | |
|
|
| Turn off associated components | |
|
|
| This minimises the potential to damage any other components when connecting | |
|
|
| your SM6 into the system. | |
|
|
| Connect SM6 to power amplifier | |
|
|
| Connect the balanced (XLR) or unbalanced (RCA) outputs of your SM6 to the | |
|
|
| appropriate inputs at the rear of your power amplifier. | |
| Note: |
| ||
|
| Try to keep all interconnect cables as far from loudspeaker cables as |
| |
|
|
| possible and well away from all AC mains leads. | |
|
|
| Connect source component to SM6 | |
|
|
| Connect the relevant output of your source component to either the balanced | |
|
|
| (XLR) or unbalanced (RCA) inputs of your SM6. | |
| Note: |
| ||
|
| Be sure to set the balanced CD input switch to the appropriate position, |
| |
|
|
| ON if using the balanced (XLR) inputs and OFF if using the unbalanced | |
|
|
| (RCA) inputs. | |
|
|
|
|
|
|
|
| Switch on source component | |
|
|
| Turn on the source component and make sure you have some program material | |
|
|
| ready to play. | |
|
|
| Switch on SM6 | |
|
|
| After checking the supply voltage compatibility with the voltage rating on the | |
|
|
| SM6 rear panel, insert the power | |
|
|
| into the wall. Switch on the socket at the wall and power up the SM6 using the | |
|
|
| switch on the rear panel. | |
|
|
| Switch on power amplifier | |
|
|
| Turn on your power amplifier. |
8