Adjustment

13.05.16 Position of knee lever

Requirement

1.When the knee lever is in its resting position, the axle 5 must be parallel to the bedplate.

2.When the presser foot is resting on the needle plate, the presser bar lifting lever 6 must be touching the circlip 8 lightly and be at a distance of approx. 1 mm from lifting piece 7.

1 mm

Fig. 13 - 17

68

7

1

5

4

23

●Lower the presser foot onto the needle plate.

●Turn shaft 1 (screws 2) according to Requirement 1.

●Turn screw 3 (nut 4) according to Requirement 2.

13 - 18