Adjustment
13.08.02 Thread wiper position
Requirement
Seen from the direction of sewing
1.The point of the thread wiper 5 must be approx. 1 - 1.5 mm to the right of the needle, and
2.The thread wiper 5 must be approx. 2 mm in front of the needle in its foremost position.
5
3
1 - 1.5 mm
4
2
1 | 5 |
2 mm
Fig. 13 - 36
● Slide bracket 1 (screw 2), without turning it, on the shaft according to requirement 1. ● Turn rod 3 (nut 4) according to requirement 2.
13 - 38