Adjustment

13.04 Checking and adjusting aids

With the aid of blocking pin 1 (part No. 13-033346-05) and if necessary adjustment gauge 3 (part No. 61-111 639-70) the machine can be blocked in the following positions for adjustment

1

3

4

2

5

Fig. 13 - 01

Needle bar position 1.8 mm past b.d.c.

● Turn balance wheel until needle bar is roughly in required position

●Insert blocking pin 1 in hole

●Turn balance wheel slightly back and forth until blocking pin engages crank 2

Needle bar position 0.6 mm past t.d.c.

●Set needle bar roughly at required position

●Place adjustment gauge 3 onto pins 4 and 5, making sure right side is used (for 30 or 36 mm needle bar stroke)

Needle bar position 0.6 mm past b.d.c.

●Set needle bar roughly at required position

●Place adjustment gauge 3 onto pins 4 and 5, making sure right side is used (for 30 or 36 mm needle bar stroke)

13 - 2