Input

6.02.02 Example of a seam program input using the "teach-in" function

The program to be created should

-have 3 seam sections and

-be stored under the program number "11" with the comment "TEACH".

Seam area 1

Learn number of stitches

Fullness: 0

Seam area 2

End with knee switch

Fullness: 30

Seam area 3

Without stitch count

End with pedal position "-2"

Fullness: 0

●Switch on the machine.

● Call up the input mode.

● Call up the "teach-in" function and enter program number "11".

● Set the seam type (right seam) by pressing until the appropriate symbol appears.

● Call up the menu for comment input.

●Enter the comment "TEACH" with the keyboard and number panel.

● Conclude the comment input.

● Change to the input of the first seam section.

39