Adjustment
1.07.05 Adjusting the magnets
Requirement
When switch unit 1 is in its left stop position
1.The magnet frame 2 should be positioned at the top stop position and
2.The magnet tappet 4 should be completely extended.
3.When the magnet tappet 4 is extended, there should be no play between the magnet tappet and lever 5.
4
1 | 2 | 3 | 3 |
| 5 |
| |
|
|
| |
Fig. 1 - 51 |
|
|
|
● Manually slide switch unit 1 as far as possible to the left (see arrow). |
|
| |
● Adjust magnet frame 2 (screws 3) in accordance with the requirements. |
| ||
59